3-1-4. Selecting the icons of the groups to be operated
On the [Floor] or [Block] display under the [Monitor/Operation] menu, select the icon(s) of the group(s) to be
operated as explained below, and then touch [Operate] to bring up the operation settings screen.
[1] Selecting group icons
(1) Selecting a group
On the [Floor] or [Block] display, touch the icon(s) of the
group(s) you want to operate. The selected group icon(s)
will appear with an orange frame.
Touch again to deselect.
To cancel all group selections, touch the "Deselect-all"
button.
(2) Selecting all groups on the selected floor
On the [Floor] display, touch the floor(s) you want to
operate, and then touch the "Select-all-groups-on-the-
floor" button. The selected floor and group icons will
appear with an orange frame.
To cancel all group selections, touch the "Deselect-all"
button.
(3) Selecting all groups on all floors
On the [Floor] or [Block] display, touch the "Select-all-
groups" button. All floor and group icons will appear with
an orange frame.
To cancel all group selections, touch the "Deselect-all"
button.
WT07992X02
Floor selection
22
Deselect-all
Select-all-groups-on-the-floor
Deselect-all
Select-all-groups
Deselect-all