Touch Panel Calibration; Software Information - Mitsubishi Electric AE-200A Instruction Book

5-4. Touch Panel Calibration

Touch [Maintenance] in the menu bar, and then touch [Touch Panel Calibration].
Start calibration
(1) Touch [Start calibration].
(2) Touch the white squares in the order they appear,
starting from the top left corner. The white squares will
change to gray when touched.
After all nine squares are touched, the screen will return
to the previous screen.
Note: If each square is not touched within one minute after the
last square is touched, calibration will be cancelled and
the screen will return to the previous screen.
Note: To calibrate the screen properly, use a pointy, but not
sharp object to touch the white dots. Sharp objects may
scratch the touch panel.
Note: It is recommended to periodically calibrate the touch
panel. (If the touch panel responds incorrectly to the
touches, some buttons may not be able to be touched.)

5-5. Software information

Detailed information about the open source software of the AE-200/AE-50/EW-50 can be checked by accessing the
following address:
https://[IP address of each AE-200, AE-50, or EW-50]/license/
* Accessible only if logged in as a maintenance user.
WT07992X02
83
White dot