Mitsubishi Electric AE-200A Instruction Book page 71

Item
[Data type: 1-month intervals]
Row
1st
2nd
3rd
4th
Energy
management
data
5th–
29th
*1 The numbers shown after "MCP" and "MCT" indicate channel No.
*2 The numbers in the parentheses indicate M-NET addresses.
*3 The M-NET address indicated in the parentheses will not appear for the measurement data of the built-in Pulse Input
(PI).
*4 The measurement unit for MCP (PI controller) will be the measurement unit that has been set on the [Measurement]
screen. (Refer to the Instruction Book (Initial Settings) for details.)
*5 The measurement item for MCT (AI controller) will be temperature or humidity, which has been set on the
[Measurement] screen. (Refer to the Instruction Book (Initial Settings) for details.)
*6 "Outdoor temperature," "Cooling set temperature," "Heating set temperature," and "Room temperature" in the data
are the average monthly values of the average temperature values obtained every day.
*7 "MCT 1" and "MCT 2" in the data are the average monthly values of the average temperature or humidity values
obtained every day.
*8 The value will not appear if the data does not exist.
*9 Each file contains up to 25 data (25-month worth of data).
WT07992X02
Item
File Type 504
Data range Start year and month + "–" + End year and month
"Month,Data1(51),...Data1(100),Data3(51),...Data3(100),
OutdoorTemp(51),...OutdoorTemp(100),CoolSetTemp(1),...CoolSetTemp(50),
HeatSetTemp(1),...HeatSetTemp(50),RoomTemp(1),...RoomTemp(50),
FanTime(1),...FanTime(50),CoolTime(1),...CoolTime(50),
HeatTime(1),...HeatTime(50),ThermoTime(1),...ThermoTime(50),
CoolThermoTime(1),...CoolThermoTime(50),
HeatThermoTime(1),...HeatThermoTime(50),
Item *1*2
SaveValue(1),...SaveValue(50),CoolSaveValue(1),...CoolSaveValue(50),
HeatSaveValue(1),...HeatSaveValue(50),
ApporionedElectricEnergy(1),...ApporionedElectricEnergy(50).
TargetElectricEnergy(1),...TargetElectricEnergy(50),
MCP1(0),...MCP1(50),MCP2(0),...MCP2(50),MCP3(0),...MCP3(50),
MCP4(0),...MCP4(50),MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250),
MCP1,MCP2,MCP3,MCP4
ApportionedElectricEnergy, TargetElectricEnergy
Data1, Data3
OutdoorTemp, CoolSetTemp, HeatSetTemp,
RoomTemp
Measurement
FanTime, CoolTime, HeatTime, ThermoTime,
*4*5
unit
CoolThermoTime, HeatThermoTime, SaveValue,
CoolSaveValue, HeatSaveValue
MCP (PI controller/Built-in Pulse Input (PI))
MCT (AI controller)
AHC (Advanced HVAC CONTROLLER)
yyyy/mm, Data 1 (51), ... (100), Data 3 (51), ... (100),
Outdoor temperature (51), ... (100), Cooling set temperature (1), ... (50),
Heating set temperature (1), ... (50), Room temperature (1), ... (50),
Fan operation time (1), ... (50), Cooling operation time (1), ... (50),
Heating operation time (1), ... (50), Thermo-ON time (1), ... (50),
Data Cooling Thermo-ON time (1), ... (50), Heating Thermo-ON time (1), ... (50),
Capacity-save value (1), ... (50), Cooling capacity-save value (1), ... (50),
*1*2*6*7*8*9
Heating capacity-save value (1), ... (50), Apporioned electric energy (1), ... (50),
Target electric energy (1), ... (50), MCP 1 (1), ... (50), MCP 2 (1), ... (50),
MCP 3 (1), ... (50), MCP 4 (1), ... (50), MCT 1 (1), ... (50), MCT 2 (1), ... (50),
AHC temperature 1 (201), ... (250), AHC temperature 2 (201), ... (250), MCP 1, MCP
2, MCP 3, MCP 4
Description
Format
*3
"
Item
71
Unit
kWh
-
ºC, ºF
Minute
kWh, m3, MJ
ºC, ºF, %
ºC, ºF