Siemens SINAMICS S120 Getting Started page 13

NOTICE
Material damage due to incorrect voltage tests
• As part of routine tests, SINAMICS devices with three-phase motors are subject to a
• Motors should be connected according to the circuit diagram provided, otherwise they
Note
Low-voltage directive
When operated in dry areas, SINAMICS devices with three-phase motors conform to Low-
Voltage Directive 2006/95/EC.
Getting Started
Getting Started, 01/2013, 6SL3097-4AG00-0BP2
voltage test in accordance with EN 61800-5-1. Before the voltage test is performed on
the electrical equipment of industrial machines in accordance with EN 60204-1, Section
18.4, all connectors of SINAMICS equipment must be disconnected/unplugged to
prevent the equipment from being damaged.
can be destroyed.
Safety instructions
1.1 General safety instructions
11