Siemens SINAMICS S120 Getting Started page 43

Hide thumbs Also See for SINAMICS S120:

Table of Contents

6. Activate the check box "Enable signals".

7. Enter a suitable speed for the motor in input field "n = ", e.g. "1,000."

Figure 7-8

8. Click on the symbol

Switching off the drive

1. To switch-off the motor, click on the

2. Click on the "Give up control priority!" button to return the control priority.

3. Confirm the following "Return control priority" prompt with "Yes."

4. Go to the menu items "Project > Disconnect from target system" to end the

5. Go to the menu items "Project > Save" to save the example project to the local hard disk

Getting Started

Getting Started, 01/2013, 6SL3097-4AG00-0BP2

The symbols

and

Control panel motor running

The motor accelerates to the selected example speed of 1000 rpm. The "Enables

available" LED lights up green

The drive coasts to a standstill.

communication between the PG/PC and the Control Unit.

of the PG/PC.

are active.

symbol.

Commissioning a drive

Table of Contents