Assigning The Ethernet Interface In Starter - Siemens SINAMICS S120 Getting Started

Creating a drive object
5.2 Setting the communication interfaces
5.2.3

Assigning the Ethernet interface in STARTER

Assigning the communication interface
1. In STARTER, go through the menu items "Tools > Set PG/PC interface...".
2. Check the access point of the application. Here, the access point "DEVICE (STARTER,
Note
The interface in our example has the designation TCP/IP -> Belkin F5D 5055 Gigabit
USB 2.0 Network Adapter.
However, any Ethernet interface of the PG/PC can essentially be used.
24
The "Set PG/PC interface" window opens:
Figure 5-2 Creating an access point
SCOUT) ..." must be set.
If necessary, correct the access point using the "Access Point of the Application" drop-
down list.
Getting Started, 01/2013, 6SL3097-4AG00-0BP2
Getting Started