Replacing A Magnetic Lock - Huawei FusionModule 1000A20 Maintenance Manual

FusionModule1000A20 Prefabricated All-in-One Data
Center
Maintenance Guide
Step 2 Install a new exit button and reconnect cables.
Step 3 Check whether the new exit button is working properly.
----End

4.3.6.3 Replacing a Magnetic Lock

Prerequisites
A spare magnetic lock of the same model is available and functional.
Impact on the System
None
Preparations
Tools: Phillips screwdriver, 3 mm hex key, step ladder (2 m)
Material: spare magnetic lock
Documents: none
Skill requirement: ELV engineer
Procedure
Step 1 Use a Phillips screwdriver to loosen screws from the baffle plate of the magnetic lock, as
shown by (1) in Figure 4-19.
Issue 01 (2019-07-15)
If the pre-fab. module door can be opened using the exit button, and the door opening event is logged,
the new exit button is working properly.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
50