Replacing A Sliding Door Magnetic Lock - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Procedure
Step 1 Remove the button.
1.
2.
3.
Figure 5-36 Removing the button
Step 2 Use the nut furnished with the new button to secure the button to the post and
connect the cable to the button.
Step 3 Verify that the button function is normal.
Step 4 Reinstall the post side panel.
----End

5.4.3.4 Replacing a Sliding Door Magnetic Lock

Context
The BOM number of a sliding door magnetic lock is 02070037. The following
components are required for installing a magnetic lock.
Issue 01 (2020-12-25)
Lift the side panel of the door post.
Remove the side panel of the door post outwards.
Remove the button connection cable, the nut on the button installation
position, and then the button.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
88