FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
5.1 CommonECC800-Pro Operations
5.1.1 Preparations and WebUI Login
Prerequisites
●
●
●
Procedure
Step 1 Connect a network cable between the PC network port and the WAN1 port
(protected by a security mechanism) on the ECC800-Pro.
Table 5-1 Default IP addresses for the WAN and LAN ports on the ECC800-Pro
Port
WAN1
WAN2
LAN1 and LAN2
Issue 01 (2020-12-25)
Supported operating system: Windows 7 and later versions
It is recommended that the screen resolution be 1366 x 768 or higher.
Browser: Chrome, Firefox, Internet Explorer 11 or later
Copyright © Huawei Technologies Co., Ltd.
5
Parts Replacement
Default IP Address
192.168.8.10
192.168.0.10
192.168.248.10 (FusionModule800)
192.168.248.10
5 Parts Replacement
54