Replacing A Door Status Sensor - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Figure 5-46 Adjusting the gap
----End

5.4.3.6 Replacing a Door Status Sensor

Impact on the System
The cabinet door status cannot be detected.
Preparations
●
●
Procedure
Step 1 Remove the cover of the door status sensor manually.
Step 2 Remove the communications cable using a Phillips screwdriver and apply
insulation measures such as wrapping the cable with insulation tape to avoid
hazards.
Step 3 Remove the door status sensor from the rack top using the Phillips screwdriver, as
shown in
Issue 01 (2020-12-25)
Tools: Phillips screwdriver, insulation tape
Material: door status sensor
Figure 5-47.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
95