FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Figure 5-23 Installing a new hard disk
Step 4 Observe the hard disk indicator to check whether the hard disk works properly.
----End
Follow-up Procedure
If the hard disk works abnormally, contact Huawei technical support.
5.4.2.6 Replacing an IVS1800
Prerequisites
●
●
●
Context
Videos cannot be recorded during the replacement of the IVS1800.
Do not operate with power on. Take appropriate insulation measures.
Procedure
Step 1 Turn off the power switch of the IVS1800, disconnect the power supply of the
IVS1800, remove the cables from the IVS1800, label the cables, and record the
original connection positions of the cables.
Issue 01 (2020-12-25)
Recommended tool: Phillips screwdriver
An IVS1800 needs to be replaced.
A spare IVS1800 of the same model is available and functional.
NO TICE
D ANGER
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
80