Huawei FusionModule2000 Maintenance Manual page 128

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
2.
Figure 5-72 Removing the PAD power connector holder (BOM number: 14190892)
Figure 5-73 Removing the PAD power connector holder (BOM number: 14190242)
Step 7 Assemble the PAD power connector holder.
1.
2.
Figure 5-74 Assembling the PAD power connector holder (BOM number:
14190892)
Issue 01 (2020-12-25)
Remove the power connector from the guide rail of the holder.
Clamp the power connector to the guide rail of the holder.
Install the holder cover using three M4x12 screw assemblies.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
121