Replacing An Rpdu; Replacing A Smart Rpdu - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)

5.2.5 Replacing an rPDU

Impact on the System
One power input of the equipment cannot work.
Preparations
●
●
●
Context
●
●
Procedure
Step 1 Open the rear door of the cabinet.
Step 2 Connect the IT load of the faulty rPDU to a normal rPDU.
Step 3 Turn off the upstream power distribution switch for the faulty rPDU. Ensure that
the rPDU input has no power, and then remove the power cables from the
terminal block on the top of the rPDU.
Step 4 Remove the bolts that secure the rPDU using a Phillips screwdriver.
Step 5 Secure the new rPDU in the installation position of the old rPDU.
Step 6 Connect the input power cables to the rPDU.
Step 7 Turn on the upstream power distribution switch for the rPDU and the rPDU input
switch.
Step 8 Verify that the rPDU power output is normal and then connect the IT load cables
to the rPDU.
----End

5.2.6 Replacing a Smart rPDU

Impact on the System
One power input of the equipment cannot work.
Preparations
●
Issue 01 (2020-12-25)
NO TE
If you need to replace any other parts, contact Huawei technical support.
Tools: Phillips screwdriver, step ladder
Material: rPDU of the same model that is available and functional
Skill requirement: power distribution engineers
The rPDU is installed near the rear door of the cabinet.
The rPDU has two types: vertical and horizontal. The following describes how
to install a vertical rPDU.
Tools: Phillips screwdriver, step ladder, label, marker
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
62