Replacing A Double-Door Magnetic Lock - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Figure 5-38 Installing a sliding door magnetic lock
Step 6 Reconnect cables to the magnetic lock based on the labels.
Step 7 Verify that the sliding door magnetic lock can function properly.
----End

5.4.3.5 Replacing a Double-Door Magnetic Lock

Prerequisites
Before disconnecting cables from the double-door magnetic lock, label the cables
based on the corresponding ports.
Impact on the System
The door cannot be controlled by the magnetic lock.
Preparations
●
●
Procedure
Step 1 Remove the mounting plate of the magnetic lock cover, as shown in
Issue 01 (2020-12-25)
NO TICE
Tools: Phillips screwdriver, rubber mallet
Material: magnetic lock
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
Figure 5-39.
90