Huawei FusionModule2000 Maintenance Manual page 129

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Figure 5-75 Assembling the PAD power connector holder (BOM number:
14190242)
Step 8 Connect cables from the power connector to the fusion module actuator, and
route the cables.
Figure 5-76 Connecting power connector cables (BOM number: 14190892)
Figure 5-77 Connecting power connector cables (BOM number: 14190242)
Step 9 Secure the PAD power connector holder.
1.
2.
Issue 01 (2020-12-25)
Remove the baffle plate from the power connector mounting holes in the
door box.
Secure the PAD power connector holder to the door box using two M4x12
screw assemblies.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
122