Huawei FusionModule2000 Maintenance Manual page 96

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Figure 5-37 Components of a sliding door magnetic lock
(1) Magnetic lock fastener
(3) Magnet
Impact on the System
The access control function of the sliding door is unavailable.
Preparations
●
●
Procedure
Step 1 Remove cables from the magnetic lock and label the cables.
Step 2 Remove the magnetic lock to be replaced.
Step 3 Secure the magnet to the magnet fastener using the screws and washers available
in the fitting bag of the sliding door magnetic lock, as shown by (1) in
5-38.
Step 4 Take out the magnetic lock and disassemble it, and keep the two screws removed,
as shown by (2) in
Step 5 Use the screws removed in the previous step to secure the disassembled magnetic
lock to the magnetic lock fastener, as shown by (3) in
Issue 01 (2020-12-25)
Tool: Phillips screwdriver
Material: magnetic lock
Figure
Copyright © Huawei Technologies Co., Ltd.
(2) Magnetic lock
(4) Magnet fastener
5-38.
5 Parts Replacement
Figure
Figure 5-38.
89