Setup the Power Measuring Unit
STEP2
1
Follow the instructions in the
Panasonic HOME IoT App to
install and register the Power
Measuring Unit.
3
First, determine the
installation position of the
Power Measuring Unit.
Tapping the "Next"
button on the final
screen of
STEP1
brings up the
screen to the left.
Tap the
"Power Measuring Unit"
button to start
registration.
If the Power Measuring
Unit is to be positioned
in a consumer unit,
ensure that at least
50mm of space is
provided above the unit
an 230mm below the
unit. After determining
the position, tap the
"Next" button.
Note
Ensure the main breaker
is opened before starting
the task.
15
2
Installation must be
carried out by a
competent person.
4
Attach the Power
Measuring Unit to a rail
within the consumer unit.
Installer Tasks
Installation of the
Power Measuring
Unit must be carried
out by a competent
person.
If you are a compe-
tent person, tap the
"OK" button to
continue.
Refer to the diagram
for the installation of
the Power Measuring
Unit. To remove, use a
flat-head screwdriver
to lower the tab
before pulling out.
After installation, tap
the "Next" button.