Panasonic HOME IoT Installation Manual page 20

Setup the Power Measuring Unit
STEP2
15
Select and connect to the Gatewayʼs SSID
using the Wi-Fi Settings on your smartphone.
The configuration process differs for Android and iOS smartphones.
Android
1.
iOS
5.
IMPORTANT
2.
3.
12345 5GHz
Abcd-router10
Wireless router̲1111
PP-01-23456
HomeIoTGW-XXXXXXX
router-A-0001
aa-wireless
1. Tap the "Go to Wi-Fi Settings" button to open the
Wi-Fi Settings on your smartphone.
2. Select the Gatewayʼs SSID.
3. Once the selected SSID has a check next to it indicating
it is connected, tap the Back button on your smartphoneʼs
navigation bar to return to the Panasonic HOME IoT App.
1. 2.
1. Before tapping the "Push here after Wi-Fi Settings" button
on the guidance screen, tap your smartphoneʼs Home button
to return to your home screen.
2. Tap the Settings icon to open the settings screen.
3. Under Wi-Fi Settings, select the Gatewayʼs SSID.
4. Once the selected SSID has a check next to it indicating it is
connected, tap the Home button to return to your Home screen.
Now tap the app icon again to return to the Panasonic HOME IoT App.
5. Tap the "Push here after Wi-Fi Settings" button on the guidance screen.
The Home IoT Gateway SSID is displayed as "Home IoTGW-XXXXXXX".
* The XXXXXXX section indicates numbers.
20
HomeIoTGW-XXXXXXX
12345 5GHz
Abcd-router10
Wireless router̲1111
PP-01-23456
router-A-0001
aa-wireless
ABCDE-0001
3.
12345 5GHz
Abcd-router10
HomeIoTGW-XXXXXXX
Wireless router̲1111
PP-01-23456
outer-A-0001
Installer Tasks
4.
HomeIoTGW-XXXXXXX
12345 5GHz
Abcd-router10
Wireless router̲1111
PP-01-23456
router-A-0001
aa-wireless