ABB DY365 Series User Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Switch
  5. DY365 Series
  6. User manual

ABB DY365 Series User Manual

Digital yearly time/astronomical switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
DIGITAL YEARLY TIME/ASTRONOMICAL
SWITCH
DY365

Advertisement

Table of Contents
loading

Related Manuals for ABB DY365 Series

Summary of Contents for ABB DY365 Series

  • Page 1 User Manual DIGITAL YEARLY TIME/ASTRONOMICAL SWITCH DY365...

  • Page 3: Table Of Contents

    Index ■ Technical features page Program menu: new astro night page ■ Safety warnings page Program menu: new astro daily page ■ Dimensions page Program menu: new astro weekly page ■ Wiring diagrams page Program menu: new astro yearly (or monthly) page ■...
  • Page 4 USER MANUAL DY365 is an electronic digital time switch for the management over time of the electrical devices. It allows time programming (periodicity: daily, weekly or annual) or astronomical programming. DY365 has two on-board relays but it’s able to control up to eight different channels (relay); the other six channels are realized by remote actuators available as accessories: DY365 4CE (4 relays) or DY365 2CE (2 relays), connected to the DY365 via BUS.

  • Page 5: Technical Features

    TECHNICAL FEATURES • Power supply: 230 Vac (-15% ÷ +10%) 50/60 Hz • Storable programs: 450 (900 events) (divisible on 8 channels) • Power consumption: 7 VA (2.6W) • Actions type: 1B • Lithium backup battery: 3V, CR14250 type (replaceable) •...

  • Page 6: Safety Warnings

    SAFETY WARNINGS DIMENSIONS (mm) n During product installation and operation it is necessary to observe the following instructions: 1) The instrument must be installed by a qualified person, strictly in observance of the connection diagrams shown in this manual. 2) After installation inaccessibility to the terminals without using dedicated tools must be guaranteed.

  • Page 7: Wiring Diagrams

    WIRING DIAGRAMS Connection of devices on the bus I/O extension port extension port DY365 DY365 4CE DY GPS / DY DCF77 DY GPS / DY DCF77 DY GPS and DY DCF77 must be powered by a DC voltage at 12V. This power supply can be obtained from terminals 6-7 of DY365 (see figure).

  • Page 8: Display And Keyboard Description

    DISPLAY AND KEYBOARD DESCRIPTION  General indications ⑤ Turn on the display  Time indication Access the menu  Channel 1/channel 2 status indication ESC (one level back)  “ ”: decrease datum/previous menu/ switching channel 1/ : active manual program lock channel 1 : blocked switchings “...

  • Page 9: Initial Operation

    INITIAL OPERATION • Once out of the package, DY365 is off: press the key Daylight Saving time (DST) - start of daylight saving time (DST): wait a moment before activating the display change: active last Sunday of March at 02:00 •...

  • Page 10: Start Page (Or Main)

    START PAGE (or main) information messages date relay 2 status hour channels status* relay 1 status • Press the key: to access the menu of the instrument Information messages to scroll through the messages of DY365 - day of the week to display the Bluetooth signal level or the calculated - GPS status (if enabled) sunrise and sunset times***...
  • Page 11 Access the store of your device, install and start the free app DBT TIMER - 9 - User manual DY365...
  • Page 12 Activate Bluetooth on DY365 device (see page 54). At the start the app displays the list of the associated DY365 devices. To associate a new device, press the symbol “ ” in the upper right corner. All the Bluetooth devices detected nearby are displayed: select the device to be associated from the list. Note: each device is identified by the product code (for example DY365) and by the serial number (for example 00000020).

  • Page 13: Menu Description

    MENU DESCRIPTION  “Settings” menu allows you to change: language, date, time, daylight saving time (DST), astronomical coordinates, minimum and maximum duration of the interval between two switchings with random program, PIN for keyboard lock.  “Manual” menu allows you to switch or to lock the status of any channel and to activate the function of random or cycle switchings.

  • Page 14: Settings Menu

    SETTINGS MENU “Settings” menu allows you to view and eventually to modify the the general operation settings of DY365, such as: language  date  time  automatic daylight saving time (DST) change  position (astronomical coordinates)  interval duration between two random switchings ...

  • Page 15: Language Setting Menu

    Language setting menu Available languages: German, English, Spanish, French, Italian, Russian. Quick access: from the main page it’s possible to access the language setting by pressing the key for at least 3 seconds. - 13 - User manual DY365...

  • Page 16: Date Setting Menu

    Date setting menu Parameters modification Parameters modification Possible date formats: day-month-year ( ), year-month-day ( month-day-year ( Choose, by convention, the first day of the week. In Italy, for example, the first day of the week is Monday, in the UK it’s Sunday. Enter the date: day, month, year.

  • Page 17: Time Setting Menu

    Time setting menu Parameters modification Parameters modification Set the time: hours, minutes. Set the time zone*. Range: -14:00 ÷ +14:00 (at 15 minutes steps). For Italy set +1:00. * The time zone must be set manuallly also with connected DY GPS module. If DY GPS is connected and active, DY365 synchronizes date, time and coordinates (longitude, latitude) thanks to the received GPS signal.

  • Page 18: Daylight Saving Time (Dst)/Winter Time (Cet) Change Setting Menu

    Daylight saving time (DST)/winter time (CET) change setting menu Daylight saving time (DST)/winter time(CET) change and vice versa can occur in an automatic way. In this case, DY365: - increases by an hour in the passage from winter time (CET) to daylight saving time (DST) - decreases by an hour in the passage from daylight saving time (DST) to winter time (CET) For every change it’s necessary to specify: the week of the month during...
  • Page 19 Parameters modification Parameters modification Choose to activate ( ) or to disable ( ) the automatic time change. Set date and time of the winter time (CET)-daylight saving time (DST) change. Set date and time of the daylight saving time (DST)-winter time (CET) change. - 17 - User manual DY365...

  • Page 20: Astronomical Coordinates Setting Menu

    Astronomical coordinates setting menu The setting of the geographical coordinates of the installation place allows DY365 to calculate, for each day of the year, sunrise and sunset times. To simplify the procedure, in the DY365 are stored the coordinates of the locations listed below; if your location is among them you can select it from the menu , otherwise it’s necessary to enter the coordinates of latitude and longitude (menu Note: the display on point...
  • Page 21 Parameters modification Parameters modification Choose the installation location. If it’s not present, proceed with steps Set the latitude of installation place. Set the longitude of installation location. Set a possible correction of the calculated sunrise time. Positive values to delay, negative values to anticipate.

  • Page 22: Random Switchings Setting Menu

    Random switchings setting menu Parameters modification The “random switching ” function (manual menu Ò random manual) allows you to automatically switch and at random time intervals any channel among the 8 available. In this menu it’s possible to define the minimum and maximum duration of the time interval between two random switchings. Default mini- mum duration is 1 minute, maximum duration is 5 minutes.

  • Page 23: Cycle Switchings Setting Menu

    Cycle switchings setting menu Parameters modification The “cycle switching” function (manual menù Ò cycle manual) is a succession of on and off switching. The cycle programme always starts from the on status. In this menu it’s possible to define the duration of on and off. The duration of the on and off duration cannot be less than one minute.

  • Page 24: Protection Pin Setting Menu

    Protection PIN setting menu The protection code (PIN) is used to lock the keyboard and prevent changes by unauthorized persons. With active PIN protection, pressing any key, it’s necessary to enter the PIN: if PIN is correct the keyboard unlocks; after 3 minutes without pressing a key, the keyboard will lock automatically.

  • Page 25: Manual Operation Menu

    MANUAL OPERATION MENU “Manual” menu allows you to manually take action on the channels of DY365 and to check their status (on, off, or “------” if the channel is not configured). Possible operations: program: the selected channel follows the set programming temporary on : the selected channel is set on until the next programmed off event temporary off...
  • Page 26 Channel status Channel status - “-----” not configured channel - on (off): on (off) channel after a programmed event - on (off) + : on (off) channel after manual setting - on (off) + : on (off) channel with blocked switching - on (off) + : on (off) channel after random event - on (off) +...
  • Page 27 Shortcut keys For channel aboard the DY365 (channel 1-2) it’s possible to set the operations described on pag. 21 through a combination of keys: - temporary on/off: press the key for channel 1 or for channel 2. If on becomes off and vice versa. - permanent on/off: press for a long time (for 3 seconds at least) the key for channel 1 or...

  • Page 28: Program Menu

    PROGRAM MENU The menu “program” allows you to: create a new program check created programs change or delete a created program copy all created programs on a channel in another channel delete all programs of a channel - 26 - User manual DY365...
  • Page 29 Channels selection scroll through the channels from 1 to 8: - by pressing the key to move to the next channel without selecting the current channel - by pressing the key to select/deselect the current channel and move to the next Select days scroll through the days of the week from 1 to 7: - by pressing the key...
  • Page 30 Programs types • Program ON/OFF: it is composed of a switching of the ON relay and of a subsequent switching of the OFF relay. It can have a daily period (everyday with the same modes), weekly (every week with the same modes), annual (every year with the same modes)*. •...
  • Page 31  Important: on the same channel can’t coexist ON pulses and OFF pulses (if an ON pulse is already present, it’s not possible to save a holiday OFF program and vice versa).  Important: on the same channel can’t coexist holiday ON programs and holiday OFF programs (if a holiday ON program is already present, it’s not possible to save a holiday OFF program and vice versa).
  • Page 32 of Monday begins and ends before the beginning of the weekly Priority list on/off program). Instead, the daily program of Sunday is carried out In case in which, on the same channel, on/off programs are provi- because it’s the only one running for that day. ded with different period (daily, weekly, ...) to carry out in the same day, only the program with the highest priority is executed.

  • Page 33: Program Menu: New

    Program menu: new Choose the channel Choose the channels to program* * See “Channels selection” on page 27 - 31 - User manual DY365...

  • Page 34: Program Menu: New Daily Timed

    Program menu: new daily timed Enter program parameters Program parameters - on/off: on time and off time - on pulse: time and pulse duration (max 59 seconds) - off pulse: time and pulse duration (max 59 seconds) - 32 - User manual DY365...

  • Page 35: Program Menu: New Weekly Timed

    Program menu: new weekly timed Enter program parameters Program parameters - on/off: day (or days)* and on time, day (or days) and off time - on pulse: day (or days)* and pulse time, pulse duration (max 59 seconds) - off pulse: day (or days)* and pulse time, pulse duration (max 59 seconds) * See “Days selection”...

  • Page 36: Program Menu: New Yearly Timed (Or Monthly)

    Program menu: new yearly timed (or monthly) Enter program parameters Program parameters - on/off: day (or days) and on time, day (or days) and off time - on pulse: day (or days) and pulse time, pulse duration (max 59 seconds) - off pulse: day (or days) and pulse time, pulse duration (max 59 seconds) - 34 - User manual DY365...
  • Page 37 How to choose the day (or days) in an annual program (or monthly) to set the program: to set the program on the last day: in the first, second, third, fourth or last week of the month of all months of all years in / the day/s (Monday, ...) of the week just specified of the specified VV month of all years the specified month (...

  • Page 38: Program Menu: New Holiday Timed

    Program menu: new holiday timed Enter program parameters HOLIDAY OFF: the relay is OFF from the beginning to the end of Holiday program HOLIDAY ON: the relay is ON from the beginning to the end of Holiday program Program parameters - beginning of the program - end of the program - 36 -...
  • Page 39 How to choose the day (or days) in a holiday program to set the program: to set the program on the last day: in the first, second, third, fourth or last week of the month of all months of all years in / the day/s (Monday, ...) of the week just specified of the specified VV month of all years the specified month (...

  • Page 40: Program Menu: New Astro Night

    Program menu: new astro night Choose Nights nights programs - 38 - User manual DY365...
  • Page 41 How to select nights scroll through the nights of the week from the first (1-2) to the last (7-1): - by pressing the key key to move to the next night without selecting the current night - by pressing the key to select/deselect the current night and move to the next How to interpret the selection If the night between the days of A and B is selected, the day A is on and underlined while B is on (not underlined).
  • Page 42 Night programs Turning on at sunset, turning off during the night. Turning on during the night, turning Turning on at sunset, turning off at sunrise. off at sunrise. No parameter required. Choose one of the three following cases: Turning on at sunset, turning off at a settable time.
  • Page 43 Turning on at sunset, turning off during Turning on during the night, turning off at the night. sunrise. Choose one of the three following cases: Choose one of the three following cases: Turning on at sunset, turning off at a Turning on at a settable time, turning off settable time.

  • Page 44: Program Menu: New Astro Daily

    Program menu: new astro daily Enter program parameters Program parameters - on/off: on time and off time - on pulse: time and pulse duration (maximum 59 seconds) - off pulse: time and pulse duration (maximum 59 seconds) - 42 - User manual DY365...

  • Page 45: Program Menu: New Astro Weekly

    Program menu: new astro weekly Enter program parameters Program parameters - on/off: day (or days)* and on time, day (or days) and off time - on pulse: day (or days)* and pulse time, pulse duration (max 59 seconds) - off pulse: day (or days)* and pulse time, pulse duration (max 59 seconds) * See “Days selection”...

  • Page 46: Program Menu: New Astro Yearly (Or Monthly)

    Program menu: new astro yearly (or monthly) Enter program parameters Program parameters - on/off: on time and off time - on pulse: time and pulse duration (max 59 seconds) - off pulse: time and pulse duration (max 59 seconds) - 44 - User manual DY365...
  • Page 47 How to choose the day (or days) in an astro annual program (or monthly) to set the program: to set the program on the last day: in the first, second, third, fourth or last week of the month of all months of all years in / the day/s (Monday, ...) of the week just specified of the specified VV month of all years the specified month (...

  • Page 48: Program Menu: New Astro Holiday

    Program menu: new astro holiday Enter program parameters HOLIDAY OFF: the relay is OFF from the beginning to the end of holiday program. HOLIDAY ON: the relay is ON from the beginning to the end of holiday program. Program parameters - beginning of the program - end of the program - 46 -...
  • Page 49 How to choose the day (or days) in a holiday astro program to set the program: to set the program on the last day: in the first, second, third, fourth or last week of the month of all months of all years in / the day/s (Monday, ...) of the week just specified of the specified VV month of all years the specified month (...

  • Page 50: Program Menu: Check

    Program menu: check Indication of the memory space (76 of 450) How to check a program choose the channel: 1 ... 8 choose the period: daily, weekly, annual, holiday or night (when it is a channel of astronomical type) choose the type: on/off, on pulse, off pulse or a night program (only if it is a channel of astronomical type) Note: a program requires more screens to be displayed: - press the key to move from the first to the second part of the same program...
  • Page 51 Choose the Choose the Choose the channel period type Check programs - 49 - User manual DY365...

  • Page 52: Program Menu: Modify

    Program menu: modify Indication of the memory space (76 of 450) How to modify or to delete a program choose the channel: 1 ... 8 choose the period: daily, weekly, annual, holiday or night (only if it’s an astronomical channel) choose the type: on/off, on pulse, off pulse or a night program (only if it’s an astronomical channel) Note: a program requires more screens to be displayed: - press the key...
  • Page 53 Choose the Choose the Choose the channel period type Modify/ Delete programs - 51 - User manual DY365...

  • Page 54: Program Menu: Copy

    Program menu: copy Select the origin channel Select the destination channel* “Copy” menu allows copying the programs of a channel (origin channel) on one or more channels (channels destination). Note: the programs previously stored on the destination channels will be deleted. * See “Channels selection”...

  • Page 55: Program Menu: Delete

    Program menu: delete Selection of channels to be delete* “Delete” menu is used to delete all stored programs on one or more channels. Note: to delete one single program to see “modify” mode (see page 50). * See “Channels selection” on page 27 - 53 - User manual DY365...

  • Page 56: Bluetooth

    BUS VEMER MENU BLUETOOTH MENU The Bluetooth menu allows you to enable or disable the Bluetooth interface and change the password used to associate your device (smartphone or tablet) to DY365. The device is supplied with deactivated Bluetooth interface. To activate it, it's enough to access Bluetooth menu and set a password different from 000000.
  • Page 57 Password change Changing the password The password is the 6-digit code required by the app for the first association between DY365 and smartphone Press the key for at least 3 seconds until the first digit of the password starts to flash.

  • Page 58: Bus Menu

    BUS ABB MENU BUS MENU DY365 enables you to control 8 independent channels but It has two relays (for channels 1 and 2). With additional DY365 4CE or DY365 2CE modules it’s possible to add some relays and associate these relays to the channels of DY365.
  • Page 59 - 57 - User manual DY365...

  • Page 60: Simple Network Configuration (One Dy365, One Or More Remote Actuators)

    To delete the configuration of a channel, select the channel (steps 2.1 and 2.2) and press simultaneously for 3 seconds the keys Complex network configuration (several DY365 one or more remote actuators) About the configuration of the network in the case of several connected DY365, contact ABB Technical Support. - 58 -...

  • Page 61: Connection Test

    Connection test The test is used to verify proper communication between DY365 and the remote actuator. It’s possible to test multiple channels simultaneously*. During the test a series of on-off commands are sent every 5 seconds to the relay in test. It’s possible to exit the test: - by pressing the key to exit the test and test another channel - by pressing the key...

  • Page 62: Programs Copy On The Bus

    Programs copy on the bus This function allows you to transfer programs from a DY365 to other DY365 connected to the same network. It’s possible: - to force the transfer to all other DY365 connected to the network ( - to transfer programs only to DY365 on which the reception mode* has been activated ( only for It’s not possible to select the programs to copy, the entire memory area is copied.

  • Page 63: Reception Programs On The Bus

    * Reception programs on the bus Activate reception mode ( ) to receive the programs from another connected DY365 (that transmits programs via the function ). The DY365 remains in reception for 1 minute and this condition is signaled from the flashing In the case where the reception is not successful the message is displayed.

  • Page 64: Sync Menu

    SYNC MENU SYNC menu allows you to enable or disable the presence of the additional DY GPS or DY DCF77 modules. DY GPS allows you to capture the information of date, time and location from satellites and then to transfer them to DY365.
  • Page 65 SYNC status SYNC status DY GPS module has hooked a sufficient number of satellites for a correct synchronization. Displays the number of hooked satellites (10 in this case). DY GPS module is not properly connected to DY365. Check the wiring diagrams in this manual. DY GPS module has not hooked a sufficient number of satellites for a correct synchronization.

  • Page 66: Hour Couter Menu

    HOUR COUNTER MENU “Hour counter” menu allows you to display the hours of use (relay on) of connected loads. The device has 8 counters, one for each channel. The maximum value of the counters is 99999 hours (about 11 years); reached the maximum limit, the counter resets automatically. To reset a counter: 1.
  • Page 67 - 65 - User manual DY365...

  • Page 68: Reset Menu

    RESET MENU “Reset” menu allows you to restore the initial state of the device. Available resets: Settings reset: deletes all the carried out settings (except the language, PIN and the channel settings on the BUS) Time programs reset: deletes all saved time programs Holiday programs reset: deletes all saved holiday programs Astro programs reset: deletes all saved astronomical programs Counter reset: resets the counters of all channels...
  • Page 69 - 67 - User manual DY365...

  • Page 70: Firmware Menu

    FIRMWARE MENU This menu shows the firmware installed in the device, where: 022 is the revision index 05 is the month 20 is the day - 68 - User manual DY365...

  • Page 71: Error Signals

    * In this case, carry out a hardware reset (see page 66). Invalid date If the error persists, contact ABB technical support Insufficient memory Attempt to set an on pulse on a channel where is already stored an off pulse (see page 27)

  • Page 72: Battery Management

    . In this case, the battery must be replaced as soon as possible. ABB declares that the device complies with the EU directive 2014/53/EU (RED) with reference to the following standards: To replace the battery: - remove the cover of battery compartment •...
  • Page 74 V.le dell’Industria 18 20010 Vittuone (MI) - Italy Tel. +39 02 2415 0000 https://new.abb.com/low-voltage © Copyright 2019 ABB S.P.A . All rights reserved. We reserve the right to make technical changes or modify the contents of this document without prior notice. 03-2020...

This manual is also suitable for:

Dy365 4ceDy365 2ce

Table of Contents