Settings; Controls / Display; Language; Code - Miele WTR 860 WPM Operating Instructions Manual

Settings

Controls / Display 
Language 
The display can be set to appear in
one of several different languages.
The  flag after the word Language
(Sprache in German) acts as a guide in
case a language which is not under-
stood has been set.
The language selected is saved.

Code

The PIN code prevents the washer-
dryer being used without your know-
ledge.
Options
-
Activate
The code is 125 and can be activ-
ated. When the PIN code has been
activated, you have to enter the code
after switching the washer-dryer on.
Otherwise the washer-dryer cannot
be operated.
-
Deactivate
For using the washer-dryer without
entering the code. This only appears
if the PIN code had been activated
previously.
-
Change
You can enter any code.
If you forget the PIN code, the
washer-dryer will have to be un-
locked by the Miele Customer Ser-
vice Department.
Make a note of your new PIN code.
114

Memory

The washer-dryer will save the last
settings selected for a programme
(temperature, spin speed and some of
the Extras) after the programme has
started.
The next time that programme is used
the washer-dryer will show those set-
tings in the display.
Factory default setting: Memory is
switched off.

Clock display

If the clock format has been set, the
time of day can be set.
Clock format
- 24 h clock (factory default)
-
12 h clock
Set
- The time can be set.

Volume

The volume for various sounds can be
changed.
-
Finish tone
- Keypad tone
-
Welcome tone
It can be set to one of 7 different levels
or switched off altogether.