Setting Up Twindos - Miele WTR 860 WPM Operating Instructions Manual

5. Setting up TwinDos


Set up "TwinDos"?
Skip
 Touch the
Continue
set TwinDos up straight away.
Tip: To postpone setup until later: touch
the sensor control. The following
Skip
message will then appear in the display:

It is possible to set up later in "Settings" /
"TwinDos".
Confirm with the OK sensor control.
Setting up compartment 
The procedure for Miele UltraPhase 1
and Miele UltraPhase 2 is described be-
low. The procedure for other detergents
is similar.
 Agent for comp. 
No agent
Miele
UltraPhase 1
 Touch the
Miele UltraPhase 1
control.
sensor control to
Universal Delicates
detergent detergent
Colour Delicates/
detergent Woollens
sensor
Before using for the first time
The following message will then appear
in the display:

Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 is preset for  (water
Continue hardness level II).
Dosage for comp. 
 Confirm the preset value with the
OK sensor control, or change the
value.

Water hardness level I
11:02

Water hardness level II

Water hardness level III 70 ml
The following will appear in the display:

Insert container 
OK
60
59
58
ml
57
56
UltraPhase 1
46 ml
58 ml
11:02
OK
25