End Of The Programme/Unloading Laundry - Miele WTR 860 WPM Operating Instructions Manual

DRYING
 Add or remove laundry.
 Close the door.
 Touch the Start/Stop sensor control.
The programme continues.
Please note:
Once a programme has started, the
washer-dryer cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a pro-
gramme, the machine will always
complete the programme cycle as-
suming a full load.
62
6. End of the programme/un-
loading laundry
In the anti-crease phase, the drum con-
tinues to turn for up to 150 min after the
end of the programme. The door will
lock and the following will appear in the
display:
Finish/Anti-crease
"Start/Stop" .
 Touch the Start/Stop sensor.
The door will unlock.
If you unload the laundry during the
anti-crease phase, heat can build up.
Spread the laundry out to cool it
down.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull open the door.
 Remove the laundry.
Items left in the dryer could be dam-
aged by overdrying when the dryer is
used the next time.
Remove all items from the drum.
Tip: See "After each washing or drying
programme".
and
Unlock with