Huawei FusionModule1000A40 Initial Configuration Parameter Manual page 99

Table 3 Initial Configuration Parameters for the Management System
Monitoring Data
Device Name
Device Type
LAN Switch FE LAN Switch
LAN Switch FE Server
Collector_EC
FE Collector_ECC800
C800
Collector_EC Smart ETH
FE
C800 Gateway-1
Collector_EC Smart ETH
FE
C800 Gateway-2
Device Device IP Device
Model Address Address
S5720-28X-
N/A N/A
PWR-SI-AC
https://192.168.
2288H V5 N/A
9.11
https://192.168.
ECC800C N/A
9.12
UT-H606 N/A N/A
UT-H606 N/A N/A
WebUI User LCD User
Alarm
Name and Name and
Threshold
Password Password
N/A N/A N/A
https://192.168.9.
11：31943
User name：
N/A N/A
admin
Initial password：
Huawei123
User name:
admin
N/A N/A
Password:
Changeme
N/A N/A N/A
N/A N/A N/A
Port to Upper-
DDF Upper-
Upper- Level
Transfer Level
Level Device
Port Device
Device Port
Port24 DDF-1 DDF DDF-1
1 or 2 N/A LAN Switch Port1
WAN_1 N/A LAN Switch Port2
Collector_E
FE_2 N/A LAN_1
CC800
Smart ETH
FE_2 N/A FE_1
Gateway-1
Remarks
N/A
1. Server Remote
Management Port BMC
The default configuration is
as follows:
BMC IP address:
192.168.2.100
User name: root
Password: Huawei12#$
Configuration after system
pre-installation:
BMC IP address:
192.168.8.10
User name: root
Password: Changeme_123
2. PowerEcho maintenance
tool:
IP address of the
https://Neteco server: 32804/
User name: admin
Password: Changeme_123
WAN_1: 192.168.8.10
(Default IP Address)
WAN_2: 192.168.0.10
LAN_1, LAN_2:
192.168.248.10
WiFi default IP address:
192.168.245.10
User name: app
Password: Changeme
N/A
N/A