Convenient Cd Recording (Ct-203/Kxf-W4010; Deck B Only); Cd Synchro Recording - Kenwood CT Series Instruction Manual

Convenient CD recording (CT-203/KXF-W4010; Deck B only)

By connecting this unit w ith a KENWOOD "f", "ƒ", "
and a KENWOOD CD player w ith a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on
the CD player can be started simultaneously.
Since this unit is not designed for recording w ith metal (TYPE
Preparation

CD synchro recording

1
Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)
2
Adjust the recording level.
1
Play a CD.
Press the 6 key
of the CD player.
3
Set the record-pause mode.
CT-2050/ KXF-W6010
CT-203/ KXF-W4010
4
Start playing the CD.
To pause
To restart recording
To stop
Downloaded from: http://www.usersmanualguide.com/
1
Complete the connections referring to
"System connections".
2
M ake "Playback (recording) preparation".
(CT-203/ KXF-W4010; Insert a tape in
deck B.)
3
(Load a disc in the CD player.)
AUTO BIAS
2
Set the record-pause mode.
8
PAUSE
÷ While pressing the PAUSE (8)
key, press the REC/ ARM (¶) key.
8 ¶
PAUSE REC/ARM
Press the 6 key of the CD player.
Press the 6 key of the CD player.
:
Press the 6 key of the CD player.
:
Press the 7 key of the CD player.
:
(ƒ)", type amplifier (receiver) w ith a SYSTEM CONTROL jack
) tapes, do not use metal tapes for recording.
6
0
: Keys and control used in the operations described on this page.
÷ The optinum bias is set in about 40 seconds, after w hich the deck
enters stop mode.
÷ For a fine adjustment after setting AUTO BIAS, refer to the description
of "Bias level adjustment" . (CT-2050/KXF-W6010 only)
÷ To cancel the auto-bias adjustment operation in the middle, press
the stop ( 7 ) key.
÷ Recording is possible even w hen the auto-bias setting is omitted.
3
Adjust the recording balance
and recording level.
¶
REC/ARM
"How to record."
÷ While pressing the PAUSE (8) key, press the REC/ ARM (¶) key.
÷ Synchro recording is not possible w hen tracks of more than one CD are
programmed using a Carrousel type CD player.
÷ Recording starts at this moment.
÷ When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
÷ If the stop ( 7 ) key of the cassette deck is pressed, the cassette deck
enters the stop mode but the CD player does not stop.
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
4
Put the CD player in stop
mode.
Press 7 key of the
^ CD player.
21
&