Kenwood CT Series Instruction Manual page 5

Handling the cassette tape
Notes on cassette tape
Safety tab (accidental erasure prevention tab)
After an important recording has been finished, break the safety
tab, to prevent the recorded contents from being erased or
recorded on accidentally.
To re-record
1. Longer tape than 110 minutes cassette tape
Since longer tape than 110 minutes cassette tape is very
thin, the tape could adhere to the pinch roller or be easily cut.
Notes Notes
It is recommended that these tapes not be used w ith this
unit to prevent possible damage.
Downloaded from: http://www.usersmanualguide.com/
For A side
For B side
Apply tape only to the position
w here the tab has been removed.
To store cassette tapes
Do not store the tapes in a place w hich is subject to direct
sunlight, or near equipment that generates heat. Keep the
cassette tapes aw ay from any magnetic field.
When there is slack in the tape
In such a case, insert a pencil into the reel hole and w ind the reel
hub to remove the slack.
2. Endless tapes
Do not use an endless tape, as this could damage the mechanism
of the unit.
Important items
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
5