Kenwood CT Series Instruction Manual page 9

1 Deck A
This deck is used exclusively for play-
back. (CT-203/KXF-W4010 only)
This deck is capable of both playback
and recording. (CT-2050/KXF-W6010
only)
2 Deck A eject (0) key
Press to open the cassette holder of
deck A.
3 Deck B eject (0) key
Press to open the cassette holder of
deck B.
4 Deck B
This deck is capable of both playback
and recording.
5 Deck A operation keys 0 ~ !
1
: Rew ind key (for fast w inding of
tape tow ard the left reel seen
from you)
¡
: Fast Forw ard key (for fast w ind-
ing of tape tow ard the right reel
seen from you)
2, 3 : Play keys
7
: Stop key (Stop)
6 POWER sw itch
Press to turn this unit ON and OFF .
7 PHONES jack
Connect stereo headphones (optional)
here.
8 TIM ER sw itch
This sw itch is used in setting of timer
playback and timer recording.
9 M ODE key
Press t o change t he recording
level,balance,or bias settings.
Downloaded from: http://www.usersmanualguide.com/
0 Deck B operation keys 0 ~ !
2, 3 : Play keys
7
: Stop key (Stop)
1
: Rew ind key (for fast w inding of
tape tow ard the left reel seen
from you)
0 ¡
: Fast Forw ard key (for fast w ind-
ing of tape tow ard the right reel
seen from you)
0
PAUSE ( 8 ) key
:Press to let tape transport pause
temporarily.
REC/ ARM ( ¶ ) key
:Press in stop mode to start re-
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
! Deck A
PAUSE (
KXF-W6010 only)
Press to let tape transport pause tem-
porarily.
@ Deck A REC/ ARM (
KXF-W6010 only)
0
Press in stop mode to start recording or
press in record mode to let the record-
!
ing pause after leaving a non-recorded
blank of 4 seconds.
# RESET A key
£
Press to reset the tape counter of deck
A to "0000" .
$ DOLBY NR key
^
Press to sw itch the Dolby Noise Reduc-
tion mode to B = C = OFF . This makes
it possible to use the Dolby NR effect in
recording and playback.
% REV. M ODE key
Press to change the tape transport di-
rection.
^ RELAY REC key (CT-2050/ KXF-W6010
only)
Press to perform continuous recording
from deck A to deck B.
& DUBB. keys (NORM ./HIGH) (CT-2050/
KXF-W6010 only)
!
DUBBING keys (NORM AL/HIGH) (CT-
203/ KXF-W4010 only)
Press to start tape dubbing.
^
NORM ./ NORM AL
HIGH
* M PX FILTER key
Press to reduce beat noise w hen record-
8 ) key (CT-2050/ ing FM broadcasts.
!
( CCRS key
Press to start recording after automatic
setting of the optimum CD recording
¶ ) key (CT-2050/
level and optimum tape recording bias.
^
) AUTO BIAS key
When this key is pressed, the bias level
appropriate for the tape is set automati-
cally for recording.
¡ RESET B key
!
Press to reset the tape counter of deck
B to "0000" .
™ REC LEVEL/ BAL./ BIAS knob (CT-
0
2050/ KXF-W6010 only)
Adjust this before recording.
£ REC LEVEL/ BAL. knob (CT-203/ KXF-
W4010 only)
Adjust this before recording.
Controls and indicators
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
0
(
)
)
: Dubbing at t he norm al
speed.
: Dubbing at a high speed.
&
™
^
^
^
9