Connecting The Ac Adaptor - Sharp AN-LS1 Operation Manual

Connecting the AC Adaptor

Take the following steps to connect AN-LS1's AC adaptor.
1
2
Downloaded from: http://www.usersmanualguide.com/
Plug the AC adaptor's DC plug into AN-LS1's DC IN jack.
Plug the AC adaptor into wall outlet.
• There is no on/off switch. AN-LS1 turns on as soon as the connected AC adaptor is plugged into
a wall outlet. The POWER LED indicator on AN-LS1's top panel will light green to indicate that it
is receiving power.
CAUTION
• The AC adaptor may interfere with reception if used near a radio.
• Prevent flammables, liquids, and metal objects from entering the AC adaptor.
• The AC adaptor is a sealed unit. Do not attempt to open or modify it.
• Do not damage, drop, or subject the AC adaptor to vibration.
• Do not leave the AC adaptor in direct sunlight.
• Avoid using the AC adaptor in humid or extremely hot places.
To wall outlet
10