Table of Contents
Advertisement
When Connecting Using Telnet
1
2
3
4
5
6
Downloaded from:
http://www.usersmanualguide.com/
Click "Start" from the Windows desktop and select "Run".
Enter "telnet 192.168.150.2" in the text box that opens up.
(If the IP address of the unit is 192.168.150.2.)
Click "OK".
"User Name:" is displayed. Input the user name and press the return key.
(If a user name has not yet been set, just press the return key.)
"Password:" is displayed. Input the password and press the return key.
(If a password has not yet been set, just press the return key.)
Input "setup" and press the return key.
| SETUP MENU will be displayed.
S E T U P
[1]IP Address
[2]Subnet Mask [3]Default Gateway
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>
• If the IP address has been changed, be sure to enter the correct IP address.
• User name and password are not set in the initial settings.
• If the user name or password is entered incorrectly three times, SETUP MENU will be quit.
M E N U
[D]Disconnect All
[Q]Quit Unchanged
12
Advertisement
Table of Contents
