Table of Contents
Advertisement
Set Items
Downloaded from:
http://www.usersmanualguide.com/
(e.g.) When setting IP Address (change from 192.168.150.2 to 192.168.150.3)
▼ The SETUP MENU
———————— S E T U P
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>1
IP Address
: 192.168.150.2
Please Enter
: 192.168.150.3
(change)
—> 192.168.150.3
———————— S E T U P
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>v
Model Name
: AN-LS1
Unit Name
: AN-LS1
MAC Address
: 08:00:1f:b1:b7:74
IP Address
: 192.168.150.3
Subnet Mask
: 255.255.255.0
Default Gateway
: Not Used
RS-232C Baud Rate: 9600 bps
Password
: Not Required
**********(Advanced Status)**********
COM Redirect Port : 10002
Accept IP Address : Accept All
Busy Reply
: ERR+<CR> code
Input Hold Time
: 1000 milliseconds
Auto Logout Time : 5 minutes
Port for Search
: 5006
• Verification of setting detail list can be omitted.
• Setting details are not effective until they have been saved.
• If an invalid number is entered, an error message ("Parameter Error!") will be displayed.
M E N U ——————————
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
M E N U ——————————
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
16
Enter "1" (number of item to be
set), and press the return key.
Display current IP address.
Enter IP address to be set and
press the return key.
Display IP address after
change.
Enter "v" and press the return
key to verify setting detail list.
IP address is being changed.
(Page
17)
Advertisement
Table of Contents
