Table of Contents
Advertisement
ADVANCED SETUP MENU
[1] Auto Logout Time (Factory default setting : 5 minutes)
[2] COM Redirect Port (Factory default setting : 10002)
[3] Busy Reply (Factory default setting : ERR + <CR> code)
[4] Input Hold Time (Factory default setting : 1000 milliseconds)
[5] Network Ping Test
[6] Accept IP Addr(1)
[7] Accept IP Addr(2)
[8] Accept IP Addr(3)
[9] Accept All IP Addr (Factory default setting : Accept All)
[0] Port for Search (Factory default setting : 5006)
[!] Restore Default Setting
[Q] Return to Main Menu
Downloaded from:
http://www.usersmanualguide.com/
******************** ADVANCED SETUP MENU ***********************
[1]Auto Logout Time [2]COM Redirect Port [3]Busy Reply
[4]Input Hold Time
[5]Network Ping Test
[6]Accept IP Addr(1) [7]Accept IP Addr(2)
[9]Accept All IP Addr [0]Port for Search
[!]Restore Default Setting
[Q]Return to Main Menu
advanced>
Setting of time until automatic disconnection of network connection.
Setting of TCP port No. capable of connecting using Sharp COM Redirection Software.
When separate devices are connected to the two control terminals (RS-232C (CONTROLLER)
and 10BASE-T), it is not possible to use one control terminal while data is being transmitted using
the other control terminal.
This setting is for operation of the control terminal that cannot be used.
(Page
22)
Changing value for Input Hold Time when a response is not returned from a projector within a set
time while separate devices are connected to the two control terminals (RS-232C (CONTROLLER)
and 10BASE-T).
(Page
22)
It is possible to confirm that a network connection between AN-LS1 and a computer etc. is working
normally.
(Page
23)
For improved security, it is possible to set up to three IP addresses allowing connection to AN-
LS1. Set IP addresses can be cancelled using [9] Accept All IP Addr.
Setting for port number used when Sharp COM Redirection Software searches for AN-LS1.
24)
Restores all setting values that can be set using the menu to the default state.
(Page
24)
Return to the main SETUP MENU.
[8]Accept IP Addr(3)
(Page
24)
14
(Page
21)
(Page
21)
(Page
23)
(Page
Advertisement
Table of Contents
