Connecting The Ac Output Power Cable - Huawei SUN2000 Series User Manual

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual
Figure 5-3 Connecting the PE cable
(1) Standby protection ground point
----End

5.4 Connecting the AC Output Power Cable

Precautions
An AC switch must be installed on the AC side of the SUN2000 to ensure that the
SUN2000 can be safely disconnected from the power grid.
Do not connect loads between the SUN2000 and the AC switch.
● Use a socket wrench and extension rod to connect the AC power cable. The
extension rod must be longer than 100 mm.
● Sufficient slack should be provided in the PE cable to ensure that the last cable
bearing the force is the PE cable when the AC output power cable bears pulling
force due to force majeure.
● Do not install third-party devices in the AC connection box.
● You need to prepare M8 OT terminals by yourself.
Issue 01 (2020-10-15)
WARNING
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
32