Huawei SUN2000 Series User Manual page 39

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual
Procedure
Step 1 Remove the AC terminal box and install partition boards.
Figure 5-4 Removing the AC terminal box
Step 2 Connect the AC output power cable (using a five-core cable as an example).
Figure 5-5 Stripping the AC power cable
Issue 01 (2020-10-15)
NO TE
● To avoid damaging the rubber liner, do not route a cable with a crimped OT terminal
directly through it.
● It is recommended that the length of the PE cable to be stripped be 15 mm longer than
the length of other cables.
● The cable colors in figures are for reference only. Select appropriate cables according to
the local standards.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
33