Cleaning; Symbols; Restriction Of Hazardous Substances (Rohs) - ABB ControlMaster CM15 Commissioning Instructions

Universal process indicator, 1/8 din

Hide thumbs Also See for ControlMaster CM15:

Table of Contents

C O N T R O L M A S T E R C M 1 5 | U N I V E R S A L P R O C E S S I N D I C ATO R , 1/8 D I N | C I/C M 1 5 - E N R E V. A

...1 Health & Safety

Cleaning

The indicator can be hosed down if it has been installed

to IP66/NEMA 4X standards. Warm water and a mild

detergent can be used.

Symbols that appear on this product are shown below:

Protective earth (ground) terminal.

Both direct and alternating current supply.

This symbol, when noted on a product, indicates a

potential hazard that could cause serious personal

injury and/or death. The user must refer to this

commissioning instruction for operation and/or

safety information.

This symbol, when noted on a product enclosure or

barrier, indicates that a risk of electrical shock

and/or electrocution exists. Only individuals

qualified to work with hazardous voltages should

open the enclosure or remove the barrier.

Recycle separately from general waste under the

WEEE directive

The European Union RoHS Directive and

subsequent regulations introduced in member

states and other countries limits the use of six

hazardous substances used in the manufacturing

of electrical and electronic equipment. Currently,

monitoring and control instruments do not fall

within the scope of the RoHS Directive, however

ABB has taken the decision to adopt the

recommendations in the Directive as the target for

all future product design and component

purchasing.

Table of Contents