3.3 Cleaning activities
3.3.1 Cleaning of the controller cabinet
Required equipment
Equipment, etc.
Vacuum cleaner
Internal cleaning
1
Cleaning considerations
This section specifies some special considerations when cleaning the controller.
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
Action
Clean the cabinet interior with a vacuum cleaner if
necessary.
•
Always use ESD protection.
•
Always use cleaning equipment as specified above. Any other cleaning
equipment may shorten the life of paint work, rust inhibitors, signs, or labels.
•
Always make sure that all protective covers are fitted to the controller before
cleaning.
•
Never use compressed air or spray with a high pressure cleaner.
•
Never leave the door open when cleaning the exterior.
© Copyright 2007-2024 ABB. All rights reserved.
3.3.1 Cleaning of the controller cabinet
Note
ESD protected
Note/Illustration
3 Maintenance
145