2 Installation and commissioning
2.7.2 Connecting a USB memory
2.7.2 Connecting a USB memory
Handling USB
Handling of USB memory is described in Operating manual - IRC5 with FlexPendant.
Location on FlexPendant
The USB port on the FlexPendant is located behind a rubber cover.
Location on main computer
The location of the USB ports on the main computer is shown by the following
illustration:
xx1300000602
A
108
A
USB ports
Note
It is recommended to use the USB ports USB
for connecting USB memory devices.
The USB ports on the X11 connector are intended for internal use.
© Copyright 2007-2024 ABB. All rights reserved.
1
2
and USB
on the X10 connector
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB