ABB IRC5 Product Manual page 147

2
3
4
Cleaning considerations
The section below specifies some special considerations when cleaning the
FlexPendant:
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
Action
It is safe to clean the FlexPendant
when the Lock screen appears.
Clean the touch screen and hard-
ware buttons using a soft cloth and
water or a mild cleaning agent.
Unlock the screen, by tapping the
buttons.
• Use ESD Protection
• Use cleaning equipment as specified above. Any other cleaning equipment
may shorten the life time of the touch screen.
• Check that all protective covers are fitted to the device before cleaning.
• Make sure that no foreign objects or liquids can penetrate into the device.
• Do not remove any covers before cleaning the FlexPendant.
• Do not spray with a high pressure cleaner.
• Do not clean the device, operating panel and operating elements with
compressed air, solvents, scouring agent or scrubbing sponges.
© Copyright 2007-2024 ABB. All rights reserved.
3.3.2 Cleaning the FlexPendant
Info/Illustration
en0400000658
en0400000658
3 Maintenance
Continued
147