ABB IRC5 Product Manual page 162

4 Repair
4.2 Replacement of panel board
Continued
2
3
4
Refitting
The procedure below details how to refit the panel board unit.
1
2
3
Continues on next page
162
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
is sensitive to ESD on page
Disconnect all connectors.
Remove the lower attachment screws, and remove
the Panel Unit.
Action
DANGER
Before doing any work inside the cabinet, discon-
nect the mains power. For more information, see
Electrical safety on page
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
is sensitive to ESD on page
Refit the panel board unit.
© Copyright 2007-2024 ABB. All rights reserved.
The unit
48.
35.
The unit
48.
Product manual - IRC5 Panel Mounted Controller
Note/Illustration
Note
Make a note of any connections.
xx0600003227
• A: fixed attachments
• B: hole for attachment
screw
Note/Illustration
3HAC047137-001 Revision: AB