ABB IRC5 Product Manual page 228

4 Repair
4.21 Replacement of brake resistor bleeder for PMC large
Continued
3
4
5
6
7
8
9
228
Action
Guide the brake resistor cables though the
cable gland of the air channel.
Refit the plate on the back of the air chan-
nel.
Refit the air channel.
Guide the brake resistor bleeder cable
through the cable gland into the drive
module.
Refit the drive module on the air channel.
Reconnect all connectors and cables to the
drive module.
Perform the function tests in section
tion tests on page 148 to verify that the
safety features work properly.
© Copyright 2007-2024 ABB. All rights reserved.
Note/illustration
xx1100000531
Cable gland
xx1100000532
Cable gland into drive module
Func-
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
A
A