ABB IRC5 Product Manual page 182

4 Repair
4.8 Replacement of fieldbus adapter in the computer unit
Continued
Refitting
The following procedure details how to refit the fieldbus adapter in the computer
unit.
1
2
3
Continues on next page
182
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 35.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 48.
Fit the fieldbus adapter in position by
pushing the fieldbus adapter along the
rails on the motherboard.
CAUTION
Push carefully so no pins are damaged.
Make sure that the adapter is pushed
straight onto the rails.
© Copyright 2007-2024 ABB. All rights reserved.
Note/Illustrator
A
xx1500001755
A Fieldbus adapter
CAUTION
Always grip the fieldbus adapter around the
edges to avoid damage to the adapter or its
components.
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB