Cleaning Activities; Cleaning Of The Controller Cabinet - ABB IRC5 Compact Product Manual

3 Maintenance

3.4.1 Cleaning of the controller cabinet

3.4 Cleaning activities

3.4.1 Cleaning of the controller cabinet
Required equipment
Equipment, etc.
Vacuum cleaner
Internal cleaning
Clean the cabinet interior with an ESD protected vacuum cleaner, if necessary.
Do's and don'ts!
The section below specifies some special considerations when cleaning the
controller.
Always:
Never:
92
• use ESD Protection
• use cleaning equipment as specified above! Any other cleaning equipment
may shorten the life of paintwork, rust inhibitors, signs, or labels!
• check that all protective covers are fitted to the controller before cleaning!
• remove any covers or other protective devices when cleaning the outside of
the controller!
• use compressed air or spray with a high pressure cleaner!
© Copyright 2009-2013 ABB. All rights reserved.
Note
ESD Protected
3HAC035738-001 Revision: E