2.4.3 Vertical mounting
General
Initially the system is configured for mounting on desk horizontally without leaning.
The method for mounting the controller in a vertical position is basically the same
as for floor mounting.
Required installation support and space
If the controller is mounted right-side up, the controller can be put on the desk
directly. A free space of 50mm on top of the controller is required to ensure proper
cooling.
xx1100000541
3HAC035738-001 Revision: E
© Copyright 2009-2013 ABB. All rights reserved.
2 Installation and commissioning
2.4.3 Vertical mounting
Continues on next page
41