ABB IRC5 Compact Product Manual page 124

4 Repair
4.9 Replacement of fieldbus adapter
Continued
Refitting
The following procedure details how to refit the fieldbus adapter in the computer
unit.
1
2
3
Continues on next page
124
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section DANGER - Make sure
that the main power has been switched
off! on page 29.
xx0200000023
WARNING!
The unit is sensitive to ESD. Before
handling the unit please read the safety
information in the section
The unit is sensitive to ESD! on page 30
Fit the fieldbus adapter in position by
pushing the fieldbus adapter along the
rails on the motherboard.
WARNING
Push carefully so no pins are damaged.
Make sure that the adapter is pushed
straight onto the rails.
© Copyright 2009-2013 ABB. All rights reserved.
Note/Illustrator
WARNING -
NOTE! Always grip the fieldbus adapter
around the edges to avoid damage to the
adapter or its components.
xx0700000194
3HAC035738-001 Revision: E