Connection To Serial Channel - ABB IRC5 Compact Product Manual

2 Installation and commissioning

2.6.4 Connection to serial channel

2.6.4 Connection to serial channel
Overview
The controller has one serial channel RS232 for permanent use which can be used
for communication point to point with printers, terminals, computers or other
equipment.
The following sections describe connection to the serial channel connector (COM1).
Location of serial channel connector
The serial channel connector is located behind the cover on the front panel of the
controller. The following illustration shows its location.
xx0900000270
A
Continues on next page
50
Serial channel connector (COM1)
© Copyright 2009-2013 ABB. All rights reserved.
3HAC035738-001 Revision: E