ABB IRC5 Compact Product Manual page 140

4 Repair
4.15 Replacement of Remote Service box
Continued
2
3
4
5
6
Refitting
Use this procedure to refit the Remote Service box.
1
2
3
4
140
Action
xx0200000023
WARNING!
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the section
WARNING - The unit is sensitive to ESD! on page 30
Remove the top cover of the cabinet.
Remove the left and right side cover of the cabinet.
Disconnect all connectors from the Remote Service
box.
Tip the unit away from the mounting rail and remove
it.
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section DANGER - Make sure that the main power has been switched off! on page
xx0200000023
WARNING!
The unit is sensitive to ESD. Before handling the unit please read the safety information
in the section WARNING - The unit is sensitive to ESD! on page 30
Fit the Remote Service box in position.
Reconnect all connectors to the Remote Service box.
© Copyright 2009-2013 ABB. All rights reserved.
Info
See Removing the top cover on
page 67.
See Removing the left side cover
on page 67 and Removing the
right side cover on page 68.
3HAC035738-001 Revision: E
29.