2 Installation and commissioning
2.6.6 Fitting the connector
Continued
3
4
56
Action
Connect the wires according to the illustration. Use a
screwdriver to make the contact tight.
Assemble the connector by fitting the hood and the
female connector, and tighten the screws.
© Copyright 2009-2013 ABB. All rights reserved.
Note/illustration
xx0900000366
For single phase:
•
X0.1 - power line
•
X0.2 - zero line
•
X0.PE - earth wire
3HAC035738-001 Revision: E