Safety; Safety Advice - Silvercrest RC DP3 4001-A FR 3726 Operation And Safety Notes

Nevertheless, please keep the device
out of the reach of children at all times.

Safety

Q

Safety advice

Read these operating instructions and
safety advice carefully. Look at the dia-
gram page and familiarise yourself with
all functions of the device before starting
it up for the first time.
Avoid danger to life from
electric shock!
Only connect the radio-controlled
sockets to earthed 230 V ~ domestic
sockets.
At all costs, avoid exposure to
damp and extreme temperatures.
Only use the radio-controlled sockets
in enclosed spaces. They are not
suitable for outdoor use.
Despite the child protection socket
, please keep the device out of
6
the reach of children at all times.
Avoid overloading the device.
Overloading can cause a fire hazard
or damage to the device. The maxi-
mum capacity is approx. 3680 W
per radio-controlled socket.
Please contact the service department
immediately operational faults arise.
Do not open the device on any ac-
count. All necessary repairs should
only be carried out by the service
department or a specialist electrical
workshop.
30 GB
Before cleaning always disconnect
the device from the mains supply. In
this case always remove the radio-
controlled electrical outlet socket
from the mains wall socket and re-
move all plugs from the device.
Do not have one radio-controlled
electrical outlet socket inserted
behind the other.
Only voltage-free when unplugged.
Do not use any additional child
protection devices for the radio-
controlled sockets. The connection
between the plug and the radio-
controlled socket could be impaired
and risk from overheating then arises.
The radio-controlled sockets already
have a child protection device which
prevents children from putting any
objects into the socket.
Ensure that the outlet is installed
close to the connected product, is
easily accessible and that the prod-
uct is not operated while covered.
If the device malfunctions, switch it
off immediately.
These instructions are a component
of the device. If you pass the device
on to a third party, these instructions
must also be handed on.
Do not switch the wireless sockets
erratically or unattended.