Instructions For Mounting The Pqf-Manager In Enclosures - ABB PQFS Installation, Operation And Maintenance Instructions

5.7 Instructions for mounting the PQF-Manager in enclosures

The PQF-Manager user interface is mounted on to the front panel. In case it needs to be
relocated to another enclosure, follow the guidelines presented next
Repeat steps 3 to 5
for the bottom
Mounting Bracket.
Step 1: Slide the PQF-Manager (a) perpendicularly to the Capacitor Bank Cubicle (b).
Step 2: Rotate the PQF-Manager to insert it into the Capacitor Bank Cubicle.
Note: cut out dimensions are 138 x 138 mm.
Step 3: Insert the Mounting Bracket (c) in the corresponding Fixation Holes (d) of the
PQF-Manager.
Step 4: Pull the Mounting Bracket backwards.
Step 5: Turn the Screw (e) into the Mounting Bracket and tighten until the PQF-Manager
is secured in place.
Once the PQF-Manager has been installed, it has to be connected electrically (Cf.
6.2).
Step 2
(b)
(c) Step 4
Step 3
(d)
Step 5 (e)
Figure 23: Mechanical installation of the PQF-Manager
Manual Power Quality Filter PQFS  Mechanical design and installation 35
(Figure 23)
(a)
Step 1
Section