Automatic Two-Sided Copying (Mx-M182D/Mx-M202D/Mx-M232D) - Sharp MX-M232D Operation Manual

AUTOMATIC TWO-SIDED COPYING
(MX-M182D/MX-M202D/MX-M232D)
Two originals placed on the document glass can be copied onto each side of a single sheet of paper. In addition, an
RSPF can be used to copy two originals onto one sheet of paper, or one two-sided original onto two sheets of paper,
or one two-sided original onto each side of one sheet of paper. This function is convenient for making copies for
identification purposes and helps save paper.
Document
glass
SPF
One-sided original
→
RSPF
• The sizes of paper that can be loaded vary by country and region.
Note
• To use paper in the bypass tray, make a two-sided copy as explained in "TWO-SIDED COPYING USING THE
BYPASS TRAY" (p.46).
• There are restrictions on the paper that can be used for automatic two-sided copying. See "Paper that can be
used for automatic 2-sided printing (MX-M182D/MX-M202D/MX-M232D)" on (p.23).
• Automatic two-sided copying is not possible when the bypass tray is used.
B4 or A3
(8-1/2" x 14" or 11" x 17")
portrait original
1
41
Original → Paper
One-sided original
One-sided original
Two-sided original
→
Two sides Two sides
Orientation of the
2
placed original
→
Two sides
→
Two sides
Two-sided original
→
One side
Normal automatic
two-sided copying
The top and bottom of
the images on the front
and back are reversed.
Usable paper
A5 to A3
(8-1/2" x 11" to 11" x 17")
• The bypass tray cannot be
used.
A5, B5, B5R, A4, A4R, B4, A3
(8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 13", 8-1/2" x 14", 11"
x 17")
• Special paper and 5-1/2" x
8-1/2" paper cannot be
used.
• The bypass tray cannot be
used.
If the orientation of
two-sided copying
is changed
The top and bottom of the
images on the front and
back are the same.