Button Manager - Sharp MX-M232D Operation Manual

BUTTON MANAGER

Button Manager is a software utility that allows the scanner function to be used by means of the [SCAN] key on the
machine. The Button Manager software allows you to assign a destination application and scan settings to each of
the six destinations on the machine.
To scan using the machine's operation panel, settings must be configured in the Control Panel after Button Manager
is installed. To install Button Manager and configure settings, see "SETTING UP BUTTON MANAGER" (p.13).
Setup window
To view Help for a setting, click the
(Scan Button Destination Settings screen) and then click the setting.
1
2
3
4
5
6
7
8
1
Tab
Click to set scan menu options. Each tab contains
scan settings for the scan menu.
2
"Application Selection" area
Select the start-up application here.
3
"Show TWAIN setting screen when scanning"
Checkbox
You can select whether or not the TWAIN screen is
shown. When the checkbox is selected, the TWAIN
screen appears when scanning is executed to let
you adjust the scanning conditions.
4
"Scan Setup" area
Set the scan conditions.
Some applications may limit your choice of
Note
settings.
Note
"Menu Name" is not used on this machine.
The scan settings for each of the six destinations can be changed in Button Manager.
To change the settings, see "BUTTON MANAGER SETTINGS" (p.74).
73
button in the upper right-hand corner of the Button Manager setup window
Full Colour
5
6
7
8
"OK" button
Click to save your settings and exit the dialog box.
"Cancel" button
Click this button to exit the dialog box without
making any changes to the settings.
"Apply" button
Click to save your settings without closing the
dialog box.
"Help" button
Click this button to display the help file for Button
Manager.