4.
To set the reel speed, on the InfoCenter open
the Main Menu and scroll down to S
5.
In the S
ETTINGS
S
and use the ± button to set the reel speed
PEED
to the desired number.
Machine Configuration Passcode
You can set a passcode on the InfoCenter so that
operator's cannot change the following machine
settings without it: R
AISE
T
-
D
, R
AP
OFF
ELAY
EEL
C
, B
C
ONTROL
LADE
OUNT
1.
From the S
ETTINGS
S
.
ETTINGS
2.
Set P
S
ROTECT
ETTINGS
3.
When prompted, enter a 4-digit passcode.
4.
Turn the ingnition key to O
Note:
If you forget the user defined passcode,
you can obtain a temporary passcode from your
authorized Toro distributor.
Diagnosing the Fault-Log indicator
The fault-log indicator icon appears on the main
screen in the event of a fault in the machine. When
this icon is present there is a new log entry in the
Faults menu that you or your distributor can use to
identify the problem.
For a list of faults, refer to your authorized Toro
distributor or the Service Manual.
Seat-Adjusting Lever
The seat-adjusting lever is located on the front, left
corner of the seat
(Figure
the seat forward and rearward.
Figure 17
ETTINGS
menu, scroll down to R
D
, L
D
ELAY
OWER
ELAY
S
, B
S
PEED
ACKLAP
PEED
, and C
(FOC).
LIP
menu, select P
ROTECT
to O
.
N
to save the code.
FF
18), allowing you to adjust
Note:
If you need additional adjustment on the seat,
you can remove the 4 bolts securing the seat to the
base and move the seat to the second set of mounting
holes provided.
g014736
.
EEL
1. Seat-adjusting handle
Fuel-Shutoff Valve
,
, C
Close the fuel-shutoff valve
LIP
the seat and under the fuel tank, when storing or
transporting the machine on a truck or trailer.
1. Fuel shutoff (under the fuel tank)
23
Figure 18
(Figure
19), behind
Figure 19
g193737
g014626